مقالات مجلات تخصصی (علمی پژوهشی، ISC و ISI)
1- "Design Optimization of a Transverse Flux Halbach-Array PM Generator for Direct Drive Wind Turbines,", R. Nasiri-Zarandi, A. Mohammadi Ajamloo and K. Abbasazdeh, , IEEE Transactions on Energy Conversion, doi: 10.1109/TEC.2020.2975259.
2- "Thermal Modeling and Analysis of a Novel Transverse Flux HAPM Generator for Small-Scale Wind Turbine Application," R. Nasiri-Zarandi, A. Ghaheri and K. Abbaszadeh, in IEEE Transactions on Energy Conversion, vol. 35, no. 1, pp. 445-453, March 2020, doi: 10.1109/TEC.2019.2936683.
3- "A Novel Transverse Flux Permanent Magnet Generator for Small-Scale Direct Drive Wind Turbine Application: Design and Analysis", A.Mohammadi Ajamloo; K.Abbaszadeh; R. Nasiri-Zarand, International Journal of science and technology (Scientia Iranica) Articles in Press, Accepted Manuscript , Available Online from 22 July 2019
4- Analysis, optimization, and prototyping of a brushless DC limited-angle torque-motor with segmented rotor pole tip structure, R Nasiri-Zarandi, M Mirsalim, A Cavagnino, IEEE Transactions on Industrial Electronics 62 (8), 4985-4993
5- Analysis and torque calculation of an axial flux hysteresis motor based on hyperbolic model of hysteresis loop in Cartesian coordinates, R Nasiri-Zarandi, M Mirsalim, IEEE Transactions on Magnetics 51 (7), 1-10
6- A novel hybrid hysteresis motor with combined radial and axial flux rotors, R Nasiri-Zarandi, M Mirsalim, A Tenconi , IEEE Transactions on Industrial Electronics 63 (3), 1684-1693
7- Finite-element analysis of an axial flux hysteresis motor based on a complex permeability concept considering the saturation of the hysteresis loop, R Nasiri-Zarandi, M Mirsalim, IEEE Transactions on Industry Applications 52 (2), 1390-1397
8- Optimization of design parameters of a limited angle torque motor using analytical hierarchy process and axiomatic design theory, M Roohnavazfar, M Houshmand, RN Zarandi, M Mirsalim, Production & Manufacturing Research 2 (1), 400-414
9- Comprehensive design of a toroidally-wound limited angle torque motor, RN Zarandi, HM Kelk, F Toorani, H Farahmandzad, J. Int. Rev. Elect. Eng. 6 (1), 198-206
10- Using axiomatic design theory for selection of the optimum design solution and manufacturing process plans of a limited angle torque motor, M Roohnavazfar, M Houshmand, R Nasiri-Zarandi, M Mirsalim, Journal of Manufacturing Science and Engineering 136 (5)
مقالات همایش‌های داخلی و خارجی
1- H. Azizi-Moghaddam, S. Mohamadian and R. Nasiri-Zarandi, "Adaptive Vector Control of Induction Motor Based Inverse Dynamic Dynamometer," 2020 11th Power Electronics, Drive Systems, and Technologies Conference (PEDSTC), Tehran, Iran, 2020, pp. 1-6, doi: 10.1109/PEDSTC49159.2020.9088437.
2- A. M. Ajamloo, A. Ghaheri and R. Nasiri-Zarandi, "Design and Optimization of a New TFPM Generator with Improved Torque Profile," 2019 International Power System Conference (PSC), Tehran, Iran, 2019, pp. 106-112, doi: 10.1109/PSC49016.2019.9081559
3- R. Nasiri-Zarandi and A. Hekmati, "A Review of Suspension and Traction Technologies in Maglev Trains," 2019 International Power System Conference (PSC), Tehran, Iran, 2019, pp. 129-135, doi: 10.1109/PSC49016.2019.9081455.
4- R. Nasiri-Zarandi and A. M. Ajamloo, "Implementation of PM Step Skew Technique to Optimum Design of a Transverse Flux PM Generator for Small Scale Wind Turbine," 2019 IEEE Milan PowerTech, Milan, Italy, 2019, pp. 1-6, doi: 10.1109/PTC.2019.8810924.
5- R. Nasiri-Zarandi, A. M. Ajamloo and K. Abbaszadeh, "Proposing the Output Equations and 3-D MEC Modeling for U -Core TFPM Generators," 2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Amalfi, 2018, pp. 292-297, doi: 10.1109/SPEEDAM.2018.8445324.
6- I. Sadeghi, H. Ehya, R. N. Zarandi, J. Faiz and A. A. S. Akmal, "Condition Monitoring of Large Electrical Machine under Partial Discharge Fault - A review," 2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Amalfi, 2018, pp. 216-223, doi: 10.1109/SPEEDAM.2018.8445261.
7- M. Aliahmadi, H. Tahanian, M. Moallem and R. Nasiri-Zarandi, "On the Use of Boundary Element Method for the Study of Low Frequency Electromagnetic Devices," 2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Amalfi, 2018, pp. 1113-1118, doi: 10.1109/SPEEDAM.2018.8445409.
8- R. Nasiri-Zarandi, A. Ghaheri and K. Abbaszadeh, "Cogging Torque Reduction in U-Core TFPM Generator Using Different Halbach-Array Structures," 2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Amalfi, 2018, pp. 1153-1158, doi: 10.1109/SPEEDAM.2018.8445328.
9- R. Nasiri-Zarandi and M. Ebrahimi, "Extracting requirements for design a two-wheels electric vehicle and proposing a design procedure," 2018 9th Annual Power Electronics, Drives Systems and Technologies Conference (PEDSTC), Tehran, 2018, pp. 462-468, doi: 10.1109/PEDSTC.2018.8343841.
10- A. Ghaempanah and R. Nasiri-Zarandi, "Design and sensitivity analysis of a fractional horsepower synchronous reluctance motor," 2018 9th Annual Power Electronics, Drives Systems and Technologies Conference (PEDSTC), Tehran, 2018, pp. 469-474, doi: 10.1109/PEDSTC.2018.8343842.
11- F. Parvin, R. Nasiri-Zarandi, M. Mirsalim and A. Cavagnino, "General design algorithm for a hybrid hysteresis motor based on mathematical modeling," IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society, Florence, 2016, pp. 1656-1661, doi: 10.1109/IECON.2016.7793627.
12- R. Nasiri-Zarandi and M. Mirsalim, "Finite element analysis of an axial flux hysteresis motor based on complex permeability concept considering the saturation of the hysteresis loop," 2015 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), Torino, 2015, pp. 90-96, doi: 10.1109/WEMDCD.2015.7194515.
13- R. Nasiri-Zarandi, M. Mirsalim and R. Ashrafii, "Investigation of the effect of winding distribution and slot opening on performance of an axial flux hysteresis motor," The 6th Power Electronics, Drive Systems & Technologies Conference (PEDSTC2015), Tehran, 2015, pp. 316-321, doi: 10.1109/PEDSTC.2015.7093294.
14- R. Nasiri-Zarandi, M. Mirsalim and R. Ashrafi, "Effect of air-gap variation and the numberof stator slots on performance of an axial flux hysteresis motor," The 6th Power Electronics, Drive Systems & Technologies Conference (PEDSTC2015), Tehran, 2015, pp. 609-614, doi: 10.1109/PEDSTC.2015.7093344.
1- بررسی سياست‌ها و هدف‌گذاری‌های صورت گرفته برای سيستم حمل‌و‌نقل الکتريکی سبک در کشورهای مختلف و مقايسه با ايران
R Nasiri-Zarandi, M zarrini, H Feshki
34th International Power System Conference (PSC2019)
2- رصد فناوری موتورهای الکتريکی پيشرانه و روش‌های کنترل آنها در قطارهای الکتريکی
R Nasiri-Zarandi
34th International Power System Conference (PSC2019)
3- مقايسه عملکرد ژنراتور شار متقاطع با آهنربای فريتی و NdFeB با آرايه هالباخ و ارائه طرح‌هايی برای استفاده در توربين بادی اتصال مستقيم
R Nasiri-Zarandi, AK Shahnani
34th International Power System Conference (PSC2019)